XL 22000 FM Transmitter
Frequency agile
FM Transmitter
- 22000 W FM Transmitter in a compact 30 rack spaces standard rack cabinet
- Newest high efficiency LD MOS devices capable of withstanding 65:1 VSWR
- Hot swappable power supplies
- Easy access to all functions via touch screen display and via web page
- Excellent audio performance
- Low power consumption with high efficiency power supply
- Meets or exceeds all FCC requirements
- Options include built-in Stereo Generator, AES-EBU Digital Audio Input, RDS/RBDS Encoder, Audio over IP Input, SNMP2, dual exciter with auto-changeover.
General Specifications
Frequency Range: 87.5 – 108 MHz
RF Output Power: 22000 W
RF Output Connector: 3 1/8” Flange, 50 Ω
Spurious & harmonic suppression: Meets or exceeds all FCC requirements Dimensions: Standard rack cabinet, 22 ¾” W x 59 ½” H x 32” D Approximate Weight: 310 Kg (68 lbs)
AC PWR requirement: 208 – 240V AC three phase or single phase (specify w/ order), 50-60Hz Power
Consumption: 31000 VA @ full power
Power readings: Programmed Output Power, Forward Power, Reflected Power
Storage temperature: -20°C to + 60 °C Operating temperature: 5 °C to + 45 °C Guaranteed performance temp: 0°C to +40°C
Relative humidity: 90 %(non condensing) Max operating altitude: 2000 m.
Cooling: Forced air (internal low noise blowers)
RF Specifications
Frequency Programmability: 10 kHz steps, synthesized, μprocessor controlled
Off lock attenuation: > 60 dBc
Lock-in time: < 20 sec. (typ. < 7 sec) Type of modulation: F3E / F8E direct FM at carrier frequency
Frequency deviation: ±75 kHz =100 %, ±150 kHz capability
Reference: 12.8 MHz VTCXO
Stability of freq. dev: ±2,5 % x 6 mo.
Consistency of deviation over range: < ± 2% from 87.5 to 108 MHz
Frequency drift: ≤ 2 kHz/year (due to internal TCXO aging). Can be user calibrated Short term stability: ± 1 ppm from -5 to +45 ºC (100 Hz @ 100MHz)
RF Harmonics: Exceeds EBU/ CCIR/FCC requirements >70dBc
RF Monitor: -40dBc±3dB from 87.5 to 108 MHz (not suitable for measuring harmonics)
Audio Specifications
Preemphasis: Flat/50/75 µs, µprocessor controlled
Preemphasis precision: better than 0.5 dB
Stereo System: CCIR / FCC “pilot tone system” Distortion, THD: Less than 0.1% (typ. 0.05%)
Intermodulation (IMD): < than 0.1% (typ. 0.05%) Transient IMD:< 0.25% (square / sine Wave)
Wideband Amplitude Response: ± 0.25 dB, 30 Hz to 100 kHz
Audio Filter Attenuation: > 50 dB @ 19 kHz, >30dB 19 to 50 kHz, >50dB to 100kHz (typ.)
Common mode rejection: > 40 dB typ. 30 Hz to15kHz (50dB on request)
Composite Specifications
Stereo Separation: 30-80Hz >50dB, 80Hz-15kHz >60 dB (typ.65) Crosstalk attn. (M / S):> 40 dB 40 Hz to 15 kHz (typ. 50dB / 100Hz to 8kHz)
Audio Spurious Products: > 53 kHz < 50 dB 38 kHz
Suppression: > 50 dB 38 kHz
Tone Generation: Internal Crystal 38 kHz
Tone Precision: 38 kHz ± 2 Hz Pilot Tone frequency: 19 kHz ± 1 Hz
Phase response: 19/38 kHz 0°± 2° internally adjustable
THD on L & R channels: < 0.1% 30Hz – 15 kHz IMD: 70 Hz / 6 kHz 4 :1 RATIO < 0.1 %Transient IM: < 0.25 % (square/sinus)
Audio response: ± 0.25 dB 20 Hz to 15 kHz Pilot Tone
Deviation: ± 7 kHz nominal
S/N: Typical Values referred to ± 75kHz: Weighted (CCIR 468/2 – Peak CCIR detector) 80 dB / 50μs -74dB / flat Weighted (CCIR 468/2 – RMS detector) 83 dB / 50μs -77dB / flat
Unweighted (RMS detector, 30Hz-20kHz) 80dB / 50μs – 79 dB / flat
Unweighted (RMS detector, 10Hz-200kHz) 80dB / 50μs – 71 dB / flat
AM Synchronous: (AM=500 Hz, FM = 500 Hz ±75 kHz Ref. = 100 % AM , RMS detector, BW 30Hz-200kHz ) < -55dB typ. -60dB
AM Asynchronous: FM = no modulation, Ref. = 100 % AM, Unweighted, RMS detector, BW 30Hz-200kHz ) < -55dB typ. -60dB
Am asynchronous: (Fm = no modulation, Ref. = 100 % AM, Unweighted, RMS detector,BW 30-200 kHz) < -68dB, typ. -80dB
Audio Inputs
SCA / RDS Input: 1 BNC connector, unbalanced, Z nominal~3 kOhm ( 2.8 < Z < 3 ) Lev: -3 +6 dBm @ 7.5 kHz, Dev. adj. from menu
AUX Input: 1 BNC conn, unbal., Z nominal ~3 kOhm ( 2.8 < Z < 3 ) Lev: -3 +6 dBm @ 7.5 kHz Deviation adj. from menu
MPX Input: 1 BNC conn., unbalanced, Z nominal~1k2 ( 1k2 ± 10 %), Lev: -3 + 6 dBm @ 75 kHz Deviation, adj. from menu
L&R +Mono Input: 2 XLR connectors
AES-EBU digital audio:XLR Connector and TOSLINK
AUDIO over IP: RJ 45
Other Connectors
19 kHz Output: 1 BNC connector, unbalanced
Z nominal: >5k Pilot = 1 Vpp19 kHz Squarewave RF
Monitor: BNC connector
Interlock & analog remote interface: DB 25 LAN / WEB: RJ 45
Touch Screen Display Readings:
Programmed Output Power; Forward Power; Reflected Power;
Deviation (simulated Led Bar);
L Audio True Peak Level (simulated Led Bar); R Audio True Peak Level (simulated Led Bar); Frequency (6 digits);
Sensitivity (3dB step); RDS, SCA, AUX, MPX Ext Modulation;
Programmed Audio Parameters; Preemphasis (Flat, 50, or 75μS);
Input Impedance; Z=10kOhm / 600 Ohm; Preset Thresholds (low RF power, mute time)
